Factors affecting pilling
May 15, 2023
The influence of yarn: The more curly the fibers have, the less they are prone to stretching during twisting. During friction, the fibers are prone to loosening and sliding, forming fuzz on the surface of the yarn. For this reason, the better the fiber curliness, the easier it is to pilling. The finer the fiber, the more fiber ends are exposed on the surface of the yarn, and the better the softness of the fiber. Therefore, fine fibers are more prone to entanglement and pilling than coarse fibers. In terms of fiber length, shorter fibers are more prone to fuzzing and pilling than longer fibers. In addition to the influence of a large number of fiber ends, the friction and cohesion between long fibers are high, making it difficult for fibers to slide onto the surface of the fabric and entangle and pilling. The twist and surface smoothness of yarns also have a significant impact on pilling. For yarns with high twist, the fibers hold tightly together, and when the yarn is subjected to friction, the fibers slip relatively less from the yarn, resulting in a decrease in pilling; However, sweaters are soft fabrics, and excessive twist can make the fabric hard, so increasing the twist cannot be used to prevent pilling. The effect of yarn smoothness is that the smoother the yarn, the shorter the surface fuzz, making it less prone to pilling.
The impact of fabric organization structure: Loosely structured fabrics are more prone to pilling and pilling than tightly structured fabrics. High numbered fabrics are generally relatively tight, so low numbered fabrics are more prone to pilling and pilling than high numbered fabrics. Fabrics with a flat surface are not prone to pilling and pilling, while fabrics with uneven surfaces are prone to pilling and pilling. Therefore, the anti pilling and pilling properties of fat patterned fabrics, ordinary patterned fabrics, ribbed fabrics, and flat needle fabrics are gradually increasing.
The impact of dyeing and finishing process: After dyeing and finishing, yarn or fabric will have a significant impact on pilling resistance, which is related to dyes, additives, and dyeing and finishing process conditions. Yarns dyed with hank yarn are more prone to pilling than those dyed with loose wool or wool tops; Fabrics dyed with finished garments are more prone to pilling than fabrics dyed with yarn; After shaping, especially after resin finishing, the anti pilling and pilling properties of the fabric will be greatly enhanced.
The influence of wearing conditions: The greater the friction and number of times the woolen sweater fabric experiences during wear, the more severe the pilling phenomenon.
Anti pilling finishing method and process
Woolen sweaters are formed products, and it is difficult to use singeing or shearing methods to prevent pilling. Currently, there are two commonly used anti pilling finishing processes, namely mild pile shrinking and resin finishing. Resin finishing is more effective.
★ Shrink resistant finishing
Scales are a major characteristic of wool fibers, which endow them with the ability to shrink. Therefore, the essence of anti shrink finishing is to treat scales to weaken or lose their directional friction effect. Mainly using chemicals to interact with scales, damaging and softening them; Or use resin to evenly diffuse on the surface of fibers, forming a thin film. This effectively limits the role of scales, causing wool fibers to lose their shrinkage properties and achieve the goal of anti shrinkage.
★ Anti moth sorting
Woolen sweaters often experience insect infestation during storage. The task of mothproof finishing is to prevent moths from surviving on the fabric and achieve the goal of mothproof. The additives used for mothproof finishing should be efficient and low toxicity, have no side effects on the human body, do not affect the color and dyeing fastness of the fabric, do not damage the wool feel and strength of the wool fibers, and have washability, sun resistance, and durability







